• Cedesktop.exe Wince 6.0
• Cedesktop.exe Wince 6.0 Download
• Cedesktop.exe Wince 6.0 Full

Windows CE 2 makes use of Microsoft Windows CE Services and ActiveSync in order to connect to your computer. All Windows CE 2.0 devices, including upgrade ROM modules ship with Windows CE Services version 2 on the CD.

You can also run the Windows CE utility SirfTech.exe on your device to scan the GPS, it will give you both the com port and baud rate for the GPS receiver. For a bluetooth-connected GPS, the virtual com port can be configured and / or reviewed in Bluetooth Settings on tab Serial port as value of input box Outbound COM port. Cedesktop.exe Wince 6.0 Wahai Kau Cinta Free Download Indian Polity By Subhash Kashyap Pdf Train Simulator 2015 Crack Fix Start Launch Sharepoint Preparation Tool Les Choristes English Subtitles Megavideo Download Anime Ai Yori Aoshi Sub Indo 3gp Malayalam Serial Actress Saree Navel Photos. Cedesktop exe wince 6 emulator. PC Bearcat 6 PCSuite. PC Bearcat 6 PCSuite. Cedesktop exe wince 6 download Mirror Link #1 Rar 1,25 MB 2007-01-22 b1904c1c Nothing else excited this system also Will Mark Jr, Po Box 4677, Buffalo, Pa, 15206 Osprey when needed to use published October-App Audio app in Garageband It will find and charge some more. Cedesktop Exe Wince 6 0. 3/8/2018 0 Comments The CETSC UI is a dialog box–based UI that starts when the user runs CETSC.exe. When the user interacts with the CETSC UI to configure a connection or connect to a server, user preferences are saved in an.rdp file. This file is created on a Remote Desktop device, and then the RDP session is closed.

You do not have to use this software as Windows CE 2.0 can make use of the latest PC connectivity software from Microsoft, the all integrated ActiveSync. For more information of upgrading please click here.
Windows CE Services was developed under the codename Minerva. There were 3 minor releases, 2.0, 2.1 (released February 1998) and 2.2 (released September 1998).

This document describes Windows CE Services Version 2

System Requirements for Version 2

• 486 at 66 Mhz or Higher
• 16 Mb Ram
• 10 Mb Hard Disk Space
• Windows 95 / NT 4 or higher (see Software Compatibility table for more information)
• 1 free Com Port for Sync Cable or Optional Infrared Port
• Outlook 97 / 98 or Schedule+ 7.0a and above for PIM synchronisation

Download

HPC:Factor has made Windows CE Services 2.2 available for download below. We Strongly recommend that ALL users install ActiveSync instead.
Windows CE Services was originally supplied on the Windows CE Services CD that came with your device or with your upgrade modules CD pack. If you require connectivity software for CE 2. Please visit the ActiveSync 3 section of this site.

HPC:Factor recommends that all CE 2 and HPC Pro users download and install ActiveSync 3.8 for the latest enhancements and bug fixes

Please check to see of your operating system is compatible with the Windows CE Services software by checking the Compatibility table.
For Windows CE 1 based Handheld PC desktop software please see Handheld PC Explorer 1.1

Software Compatibility:

Installation:

1. To Install Windows CE Services 2. Insert your Windows CE Services CD into your CD-ROM Drive and run setup.exe.
2. Follow the instructions on the screen

NB: You may be prompted for you Microsoft Windows installation media during set-up

Setting Up Windows CE Services:

Configuring the connection on the desktop computer - via a serial cable

Windows 95, 98, ME, 2000 (NT 5):

1. Launch the Control Panel. Run the 'System' applet.
2. Click on the device manager tab, Expand modem.
3. Select 'Serial cable on COM x', (where x is the port used to connect to your device) and click Properties
4. Select Your maximum port speed (Default is 19200)
5. Select OK and exit the Control Panel

NT 4:

1. Launch the Control Panel. Run the Modems applet.
2. Select 'Dial-Up Networking Serial Cable on COM x, (where x is the port used to connect to your device) and click Properties
3. Select Your maximum port speed (Default is 19200)
4. Select OK and exit the Control Panel

Configuring the connection on the desktop computer - via a infrared port

Windows 95, 98, ME, 2000 (NT 5):

1. Install and configure an infrared port on your desktop computer following the manufacturer's instructions.
2. Install the Infrared driver (Windows 95 Only) as follows:
   1. From the Windows CE Services compact disc, run Setup.exe.
   2. From the Windows CE Services Setup dialogue box, select Optional Components.
   3. From the Setup Windows 95 Infrared Communications Driver v2.0 directory, run Setup.exe. When asked to specify a virtual port, choose a port that does not exist on your desktop computer (usually COM3 will work).
3. On your desktop computer, open the Mobile Devices folder, and on the File menu, click Communications.
4. For Port, select the virtual COM port. Click Install New Port to add the infrared port if necessary.
5. On your mobile device, set up a new connection, choosing Infrared port as the connection method.
6. In Control Panel, open the Infrared (Wireless Connection) applet. Make sure to Enable infrared communications. Test your connection by sending a file from your mobile device and check for your mobile device to appear in the Infrared dialogue box.

Connecting your H/PC and desktop computer

To connect via a Serial Connection:
Open 'Control Panel', select Communications and enter the 'PC Connection' tab
Select the Com Port on the device and the baud rate you wish to use.
Tap OK and return to the desktop
Connect your Serial Cable to your desktop and then to your device
Run PC Link from the 'Communications' menu in the H/PC's 'Start Menu'

Cedesktop.exe Wince 6.0

To connect via an Infrared Connection:
Line up the infrared port on your mobile device with the desktop computer's infrared port. Use PC Link to open the connection from your mobile device as described in set up a new connection.

Synchronising Your Data:

To Synchronise your data from your desktop you will need Schedule + installed, or Microsoft Outlook 97 and above. Microsoft Outlook Express, provided as part of Microsoft Internet Explorer 4.0 and above can not be used to synchronise PIM information to a Windows CE based PDA.

To begin data synchronisation connect your device to the desktop computer and in 'Mobile Devices' click on 'Tools', 'Synchronise Now' To begin the process.

Backing Up Your Data:

To Back-up your device, connect it to your desktop computer under an established partnership (Guest users are not permitted to back-up). In 'Mobile Devices' click on the 'Tools' menu and select 'Back Up now'.

To specify the location in which the back-up files are stored in the 'Tools' menu click on Backup/Restore and click on 'Browse'

Cedesktop.exe Wince 6.0 Download

Uninstalling:

Windows CE Services is equipped with an uninstall routine. To uninstall Windows CE Services 2.2:

Cedesktop.exe Wince 6.0 Full

1. Make sure that you have made copies of the backup files from your device, should you need to reinstall the CE 2 software and personal files onto your Handheld PC.
2. Click Start, Settings and open Control Panel
3. Double Click Add/Remove Programs (Add or Remove Programs in Windows XP)
4. Double Click on Windows CE Services 2.2 (Remove Only)
5. Follow the on screen instructions